[Full Version] 2016 New Released Cisco 300-080 Exam Dumps Free Download In Lead2pass (141-160)

2016 November Cisco Official New Released 300-080 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

I was recommended by one of my friend, he used the Lead2pass 300-080 dumps and said they are helpful. He was right! I passed my Cisco 300-080 exam yesterday. I was lucky, all my questions in the exams were from Lead2pass dumps.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-080.html

QUESTION 141
Refer to the exhibit, which displays the output of the debug ccsip messages command on a Cisco router.

1411

What is the negotiated dual tone multifrequency on this call?

A.    h245-alphanumeric
B.    rtp-nte
C.    sip-kpml
D.    sip-notify
E.    cisco-rtp
F.    h245-signal

Answer: B

QUESTION 142
After you deploy SAF in a mega cluster and you verify that TCP port 5050 is open, you notice that SAF connections are failing.
Which two functions must you check to troubleshoot the problem? (Choose Two)

A.    Cisco AXL Web Service
B.    Cisco UP XCP Router Service
C.    Connection Conversation Messenger
D.    SMTP Server
E.    CCD Advertising Service
F.    CCD Requesting Service

Answer: EF

QUESTION 143
You discover that a CCD client is failing to learn patters with RTMT.
Which two actions can you take to troubleshoot the problem? (Choose Two)

A.    Verify that SIP trunk between Cisco Unified Communications Manager and the Cisco Unified Presence Server is configured correctly.
B.    Verify that the trunk is selected for the CCD advertising service.
C.    Verify that the trunk is selected for the CCD requesting service.
D.    Verify that EIGRP topology information is available to the SAF Forwarders.
E.    Verify the SAF configuration.

Answer: CE

QUESTION 144
Refer to exhibit. A customer reports that calls that are made through the PSTN gateway drop after few seconds of being placed on mute.
Which mgcp configuration command can you issue in the gateway to resolve this problem?

1441

A.    Mgcp explicit hookstate
B.    Mgcp max-waiting-delay
C.    No mgcp rtp unreachable timeout
D.    No mgcp timer receive-rtcp

Answer: C

QUESTION 145
Where do you configure the phone book provisioning synchronization for an endpoint that is registered to Cisco VCS?

A.    In Cisco Unified Communications Manager, under the SIP trunk to Cisco VCS
B.    On the Cisco Express C
C.    In the Cisco Telepresence Management Suite in the Cisco VCS Configuration
D.    On the Cisco VCS Expressway
E.    On the cisco VCS Control
F.    In the Cisco Telepresence Management Suite Under Administration > Provisioning

Answer: F

QUESTION 146
Which three statements about SAF forwarding are true? (Choose Three)

A.    It supports DNS and IP addresses.
B.    The SAF Forwarder configuration can be updated without connecting to cisco unified communications manager.
C.    It requires the SAF Forwarders to use the same configuration as the IOS switch.
D.    It is supported on IPV4 only.
E.    It is supported on IPV6 only.
F.    It requires a unique IP address for each SAF Forwarder.

Answer: ADF

QUESTION 147
Which alarm string purges all learned patterns from the Cisco Unified Communications Manager?

A.    DuplicateLearnedPattern
B.    SAFForwarderError
C.    CCDIPReachableTimeOut
D.    CCDPSTNFailOverDurationTimeOut
E.     CCDLearnedPatternLimitReached

Answer: D

QUESTION 148
While you deploy SAF CCD in a remote location, you are unable to enable the SAF CCD Service on a Cisco IOS based device. Which action can you take to troubleshoot the problem?

A.    Verify that Cisco Unity Express is Operational
B.    Verify that IOS Release 15.0(1) M is installed.
C.    Verify that DSP farm resources are configured on the device.
D.    Verify that the device has sufficient RAM to run SAF CCD.
E.    Verify the integrity of the flash installation.

Answer: B

QUESTION 149
Which two statements about software MTP devices are true?

A.    The RTMT can monitor the number of registered and in use MTPs
B.    A singe MTP can register with multiple Cisco unified Communications Managers.
C.    Each server can support up to four instances of the Cisco IP Voice Media Streaming Application.
D.    The Cisco IP Voice Media Streaming Application can reduce the performance of the Cisco Unified Communications Manager it is installed on the same server.
E.    When you configure and restart the MTP, the changes are applied immediately to active calls.
F.    When you configure and reset the MTP, the changes are applied immediately to active calls.

Answer: AD

QUESTION 150
When you are dialing from an internally registered device on Cisco VCS, in which order are the options processed to determine the call routing?

A.    CPL, Transforms, FindMe, Search Rules
B.    CPL, FindMe, Transforms, Search Rules
C.    Transforms, CPL, FIndMe, Search Rules
D.    Search Rules, Transforms, CPL, FIndMe
E.    FindMe, CPL, Transforms, Search Rules

Answer: C

QUESTION 151
Which command do you use to confirm that a router interface is enabled for SAF?

A.    Show eigrp service-family ipv4 client details
B.    Show ip interface details
C.    Show ip saf-service-family interface
D.    Show run
E.    Show eigrp service-family interface
F.    Show eigrp service-family ipv4 <AS Number> interfaces

Answer: F

QUESTION 152
You implement multiple registrars for SIP Trunks for the Cisco Unified Border Element to ensure redundant PSTN access, you receive an error that indicates that the registration server is invalid. Which two commands correct the problem? (Choose two)

A.    Registrar 2 ipv4:1.1.1.1 expires 360
B.    CUSP registrar 9 dns:cisco.com expires 60
C.    No registrar 2 dns:cisco.com expires 60
D.    Registrar 20 dns:cisco.com
E.    Registrar 1 dns:cisco.com expires 180

Answer: AE

QUESTION 153
In a Cisco Unified communications Manager Call trace, which string indicates an intra-site call?

A.    OutsideDialtone = [1]
B.    cmDeviceType = [Access Device]
C.    OutsideDialtone = [0]
D.    OutsideDialtone = [2]

Answer: B

QUESTION 154
Two Cisco DX80 collaboration endpoints that support high definition video are registered to a Cisco Unified Communications Manager in a single site deployment model. However, the video that is displayed is pixelated and appears as Sub-HD. To enable the Cisco DX80s to make high definition video calls, which configuration option do you check?

A.    Check the DSCP for video calls value in the Cisco Unified Communications Manager Clusterwide parameters QoS configuration.
B.    Check that video capabilities are enabled under the product specific configuration area for the device in Cisco Unified Communications Manager.
C.    Check the maximum session bit rate for video calls in the Cisco Unified communications manager regions configuration.
D.    Check the configuration in the Cisco DX80 settings menu and enable high definition video.

Answer: C

QUESTION 155
A remote office uses a VPN with the HQ office to register its phones for centralized management. The office has a local SIP gateway with PRI for calling and to support SRST. On the Cisco Unified Communications Manager, a device pool is created for this site with media resources that are local to Cisco Unified Communications Manager. A SIP trunk that requires an MTP connects to the gateway. Users report voice quality issues when making and receiving calls.
How do you resolve this issue?

A.    Restart the phones at remote office
B.    Restart the voice gateway and switch
C.    Enable QoS on the remote office
D.    Assign an MTP that is local to the remote office to the device pool that is used by the phones.

Answer: D

QUESTION 156
After you deploy a hardware transcoder, users without a common codec are unable to complete calls to one another.
Which two actions must you take to troubleshoot the problem? (Choose Two)

A.    Use RTMT to verify that transcoder resources are available.
B.    Verify that all SIP trunks are registered within Cisco Unified Communications Manager
C.    Verify that media resources are assigned to the transcoder
D.    Verify that transcoder is registered with Cisco Unified Communications Manager
E.    Verify that the transcoder is running the latest firmware and flash NVRAM.

Answer: AD

QUESTION 157
Users on your network report fast busy signals when they attempt to place calls.
While troubleshooting, you verify that codecs are configured correctly and determine that the network carries up to 200 concurrent calls different times of the day.
Which two actions correct the problem? (Choose Two)

A.    Add more Cisco Unified Communications Manager to cluster
B.    Add more DSPs to the NM-HD
C.    Increase the number of sessions to the maximum allowed by system resources
D.    Implement an SRST-CME gateway to improve resource allocation
E.    Add a cisco catalyst switch to the environment to increase port density.
F.    Bind the network PRIs to add additional bandwidth.

Answer: BD

QUESTION 158
Which two items are displayed on the endpoint registration verification page in Cisco VCS? (Choose Two)

A.    Endpoint MAC Address
B.    Device Pool
C.    Endpoint Registration Status
D.    Device Description
E.    Device Type
F.    Endpoint name

Answer: EF

QUESTION 159
After you deploy Cisco Unified Communications manager device mobility in your environment, you note that phones in a remote site are failing to register.
Which two actions correct the problem? (Choose Two)

A.    Verify that remote site is assigned to the device mobility group that matches its dialing pattern
B.    Verify that phones are attempting to register with correct mega cluster in the device pool of the central office
C.    Verify that Extension mobility is configured correctly for the remote site
D.    Verify that the LDAP server is configured to support Device Mobility at the Remote Site
E.    Verify that the subnet of the remote site is configured in Device Mobility info.

Answer: AE

QUESTION 160
A user is trying to call a mobile phone using the number 547895341, where 5 is the pre-fix to call off-net numbers. Calls to mobile phones have worked in Past, but now the call does not work. Which three areas should you check to resolve the issue? (Choose Three)

A.    Verify that Cisco Unified Border Element is running.
B.    Verify the search pattern.
C.    Verify the route pattern, route list and route group.
D.    Check that Cisco VCS control and Cisco VCS Express are getting through firewall.
E.    Verify that the PSTN line is connected to the Cisco Unified Communications Manager.
F.    Verify that connection to and from the Cisco Unified Border Element is good.

Answer: ACF

I think Lead2pass dumps are very good for the people who do not have much time for their Cisco 300-080 exam preparation. You can easily pass the exam only by memorize Lead2pass exam questions. Believe or not, I did so and I passed my 300-080 exam.

300-080 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDYWptN2NfWG1xbE0

2016 Cisco 300-080 exam dumps (All 196 Q&As) from Lead2pass:

http://www.lead2pass.com/300-080.html [100% Exam Pass Guaranteed]